1.Connector Material: Brass
2.Contact Plating: Nickel
3.Connector Body Style: Straight
4.Impedance: 50 Ohm
5.Connector A: BNC Connectors
Connector B: Coaxial BNC Male
10 Sets BNC Plug Crimp Connectors
SMA to CRC9 Pigtail Cable SMA Female Bulkhead Connector to
CRC9 Male Right Angle Connector RG316 Cable 15cm 6"
Pigtia Cable Connector
male right angle
RG316 cable 6"15CM default
SMA female bulkhead
Length:15 cm approx
Wireless LAN Devices
External Antenna Applications
Wireless OEM Applications
1 X cable
Name: 50pcs 4 Size Assortment Solder Sleeve Heat Shrink Butt Tube Terminal Connectors
Material: Tinned Copper
Color: Red, Blue, White, Yellow
Placement on Vehicle: Left, Right, Front, Rear
20X Red Shrink Connectors: diameter 3.0 mm, cable cross-section 0.5-1.0 mm²
15X Blue Shrink Connectors: diameter 5.0 mm, cable cross-section 1.0-2.5 mm²
10X White Shrink Connectors: diameter 1.5 mm, cable cross-section 0.3-0.5 mm²
5X Yellow Shrink Connectors: diameter 6.0 mm, cable cross-section 4.0-6.0 mm²
Solder and seal and with advanced waterproof function.
Polyolefin tubing in outside and hot melt adhesive in inside.
Can be ideal used in marine and automobile applications.
Comply with all relevant European standards. Shrinking ratio: 2:1.
Improve pullout strength, provides seal, strain relief, cable check, and insulation.
More Effective Way - An easy one step connection of wires, insulated and sealed.
Easy Operation - Transparent sleeve provides precise inspection when strip and insert wires inside.
No Slip Wire Contact - Tubing reduces in size and solder will melt and flow through the stripped wires, ensure strong holding, wire will not slip out of the connector.
50 Pcs Heat Shrink Connectors (4 size)
-These work great with all your typical and breadboard style pin connectors and sockets
-This kit comes with the most common dupont pin housings in addition to male and female crimp pins - all in a high quality case
Name:620Pcs 2.54mm Electronic Terminal Connector
Compatible Wire Gauge (AWG) :18-26AWG
Operating temperature: 25℃——85℃
40 x 1x2P
50 x 1x1P
20 x 1x4P
20 x 1x3P
20 x 1x5P
20 x 1x6P
10 x 2x2P
10 x 2x4P
10 x 2x3P
10 x 2x6P
10 x 2x5P
200 x Male Crimp Pins
200 x Female Crimp Pins
This listing features 10pieces of 221-412 2 Conductor Compact Connectors.
Connect solid, stranded, and flexible copper wires faster and more reliably.
Operate comfortably and with lower operating forces by using familiar orange levers.
Visually inspect for proper strip length and complete wire insertion through its transparent housing.
Ideal for construction,electrical control,power supply,home appliances,lighting, machinery and other wire connection parts.
- Combination of different wire sizes and types in one connector
- Flame-proof,Insulating,Quick Connect
- CE certification,Safe and reliable
- Small space consumption,Low installed cost,Safe operation
Terminal body: Electrolytic copper
Spring: Alloy Steel
Rated current: 24A
Rated voltage: 450V
Nominal cross-section:2 x 0.2 - 2.5mm2
(Multicore cable / single wire conductor)
Wire strip length:9mm
10 x Conductor Compact Connectors
Dia of Rings:98mmx78mm
- Stainless steel material, wear-resistant, anti rust, long service life
- Surface polishing, simple and easy, easy to install
- Waterproof ,very durable
Please allow 1-5mm error due to manual measurement.please make sure you do not mind before you bid.
1x Pull Ring
Material: 45# Steel, Copper Core
Surface Treatment: Plating with Nickel
Hasp Thickness: 4.5mm
Length: 198mm / 7.8"
Width: 114mm / 4.5"
● Puck Lock and Hasp Combo Pack.
● Hardened Steel Puck completely covers hasp, making it impossible to cut.
● Made to withstand bolt cutters, drills, saws and sledge hammers.
● Best used for trucks, vans, gates, vending, industrial, storefront and business gates.
1 x Shackle Padlock and Hasp
2 x Keys
Material: Iron Zinc Plating
Dimensions: 40x40mm/1.6x1.6", 60x60mm/2.4x2.4", 70x70mm/2.8x2.8"
Application: Iron Art Gate, Iron Fence, Iron Art Fence, Iron Staircase, Iron Art Window, etc.
● Suitable for wooden, concrete or metal posts
● Easy to install, just put some construction grade adhesive under cap to affix to top of post.
● Uniquely designed Wrought Iron Ball Finial Design.
● The stylish ball shape prolongs the life of any fence post by guarding against rain and the elements.
● If you have very square post, some slight sanding on the edges may be necessary.
1 x Iron Post Cap
Type : Book Shelving
Dimensions: 30cm x 30cm x 120cm/11.8" x 11.8" x 47.2"
Distance to Wall : 13cm/5.1"
The Pipe Dia: 2.5cm/1"
Room: Living Room, Bedroom, Kitchen, Dining Room, Children's Bedroom, Home Office/Study
● Easy to assembled.
● Industrial Urban Style Steel Pipe Shelf Shelving Storage.
● Black brush wall hanging DIY shelf.
● you can display books for home, cafes, office decoration.
1 x Pipe Shelf with Screws(Not Include Books)
Flange Diameter: 85mm/3.3"
Short arm: 90mm/3.5"(Including flange and elbow)
Long arm: 140mm/5.5"(Including flange and elbow)
Package: 2x Pipe Shelf Bracket
Application: Just attach a plank of wood/scaffolding board finish to suit your decor.
Made of good iron material, strong hardness.not easy to break,very durable
Retro industrial water pipe design,beautiful and elagant,show out your wonderful aesthetic and taste.
It perfect for bottles shelf.
Fix a wooden board with floor flange, than fix the whole bracket to the wall with screws and screw holder,
you can DIY something as you like to suit your decor.
2 x Pipe Brackets
1.Soft material but it is not easy to broken.
2.It is portable for you to plan subpackage things.
3.You can decor the board with your beautiful tape.
4.Round corner is safer.
6 x PVC Plate
Want to start a simple DIY project in your Leisure time?
Or struggling for a gift to your families or your friends?
This Acrylic DIY frame can meet what you need.
Come on! Design a specical pattern by yourself and enjoy it during the process!
Black: Dark Black
Size: About 5x5x0.2cm
Weight: About 4g
● Made of Acrylic with smooth surface, durable and easy to use.
● Hand enthusiasts must have!
● A good gift for yourself or friends.
● Mix and match, personality DIY, create your own jewelry!
● Great to be used as they are or fill them up with resin, confetti, glitters, rhinestones, pearls,
floating charms, mini charms, mini cabochons, etc.
1. Tear off the protective film.
2. Paste a tape on one side.
3. Coate a layer of transparent UV glue in the frame. Suck the bubbles with a straw.
3. Cure with an ultraviolet light (nail lamp or flashlight) for 2 minutes, and then turn to the back
side ,cure 2 minutes.
5. Fill in the frame with your favorite color, curing for 5 minutes.
6. Turn to the tape side, cure 3 minutes.
7. Tear off the tape. Your project is finished!
1 x Acrylic DIY frame
Your shopping cart is empty!